LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1832 (Lighting System) >> Auto Light System >> CONSULT-II Function (IPDM E/R) >> Active Test >> Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Procedure

WARNING: This page is about a different car, the 2006 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "ACTIVE TEST" on "SELECT DIAG MODE" screen.
  2. Touch item to be tested, and check operation.
  3. Touch "START".
  4. Touch "STOP" while testing to stop the operation.
    ACTIVE TEST DESCRIPTION TABLE

    Test item CONSULT-II screen display Description
    Tail lamp relay output TAIL LAMP Allows tail lamp relay to operate by switching operation ON-OFF at your option.
    Headlamp relay (HI, LO) output LAMPS Allows headlamp relay (HI, LO) to operate by switching operation (OFF, HI, LO) at your option (Headlamp high beam repeats ON-OFF every 1 second).
    Front fog lamp relay output Allows fog lamp relay to operate by switching operation ON-OFF at your option.
    Cornering lamp relay (RH, LH) output CORNERING LAMP Allows cornering lamp relay (RH, LH) to operate by switching operation ON-OFF at your option.
scientia non olet · About LEMON Manuals