3. Check App Sensor Ground Circuit For Open And Short
WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch OFF.
- Disconnect ECM harness connector.
- Check harness continuity between the following;
electric throttle control actuator terminal 9 and ECM terminal 89.
electric throttle control actuator terminal 12 and ECM terminal 100
Refer to WIRING DIAGRAM .
Continuity should exist.
- Also check harness for short to ground and short to power.
OK or NG
- OK: GO TO 5. CHECK APP SENSOR INPUT SIGNAL CIRCUIT FOR OPEN AND SHORT .
- NG: GO TO 4.