3. Check ASCD Clutch Switch Circuit

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF.
Disconnect ASCD brake switch harness connector.
Turn ignition switch ON.

Fig 1: Disconnect ASCD Brake Switch Harness Connector
Courtesy of NISSAN MOTOR CO., U.S.A.
Check voltage between ASCD brake switch terminal 1 and ground under the following conditions with CONSULT-II or tester.

Fig 2: Test Parameters

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Check ASCD Clutch Switch Circuit

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

OK : GO TO 10.
NG : GO TO 4.