LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 846 (Brake Control System) >> VDC/TCS/Abs >> G Sensor >> Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Removal

WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove center console. Refer to CENTER CONSOLE ASSEMBLY .
  2. Disconnect harness connector.
  3. Remove installation nuts. Remove yaw rate/side/decel G-sensor.
    Fig 1: Removing G Sensor
    G01199093Courtesy of NISSAN MOTOR CO., U.S.A.
CAUTION:
  • Do not drop or strike the yaw rate/side/decel G-sensor, because it has little endurance to impact.
  • Do not use power tool etc., because Yaw rate/side/decel G sensor is weak for the impact.
scientia non olet · About LEMON Manuals