Inspection 1 Wheel Sensor System: Notes
WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
After using the CONSULT-II SELF-DIAG RESULTS to determine positions of malfunctioning wheel sensor, check all areas to determine the component to be replaced.
CAUTION:
- Do not measure the resistance value and also voltage between sensor terminal with tester etc., because e sensor is an active sensor.
- Do not expand terminal of connector with a tester terminal stick, when it does the inspection with the tester.