Retained Power Operation

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition switch is turned to the OFF position from ON or START position.

Power is supplied for 45 seconds

to power window main switch terminal 10.
to rear power window switch (LH and RH) terminals 1
from BCM terminal 53.

Then the power window can be operated.

When power and ground are supplied, the BCM continues to be energized, and the power window can be operated.

The retained power operation is canceled when the driver or passenger side door is opened.

RAP signal period can be changed by CONSULT-II. Refer to "CONSULT-II Inspection Procedure ".