Section 1154 (Front Wiper And Washer)
WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- Precaution
- Front Wiper And Washer System
- Components, Parts and Harness Connector Location
- System Description
- CAN Communication System Description
- CAN Communication Unit
- Schematic
- Wiring Diagram - WIPER -
- Terminals and Reference Values for BCM
- Terminals and Reference Values for IPDM E/R
- How to Proceed With Trouble Diagnosis
- Preliminary Check
- CONSULT-II Functions (BCM)
- Consult-II Operation
- Work Support
- Data Monitor
- Active Test
- CONSULT-II Functions (IPDM E/R)
- Front Wiper Does Not Operate
- Front Wiper Does Not Return to Stop Position
- Only Front Wiper LO Does Not Operate
- Only Front Wiper HI Does Not Operate
- Only Front Wiper INT Does Not Operate
- Front Wiper Interval Time Is Not Controlled by Vehicle Speed
- Front Wiper Intermittent Operation Switch Position Cannot Be Adjusted
- Wipers Do Not Wipe When Front Washer Operates
- After Front Wipers Operate for 10 Seconds, They Stop for 20 Seconds, and after repeating the operations five times, they become inoperative
- Front Wipers Do Not Stop
- Removal and Installation of Front Wiper Arms, Adjustment of Wiper Arms Stop Location
- Removal and Installation of Front Wiper Motor and Linkage
- Disassembly and Assembly of Front Wiper Motor and Linkage
- Washer Nozzle Adjustment
- Washer Tube Layout
- Removal and Installation of Front Washer Nozzle
- Inspection for Washer Nozzle
- Removal and Installation of Front Wiper and Washer Switch
- Removal and Installation of Washer Tank
- Removal and Installation of Washer Pump