LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Power Windows) >> Circuit Tests >> Jam Protection Pulse Switch Circuit (Front) >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the jam protection pulse switch. See JAM PROTECTION PULSE SWITCH (DRIVER)  or JAM PROTECTION PULSE SWITCH (PASSENGER)  . If the results are OK, go to the next step. If the results are not good, replace the power window motor. See WINDOW REGULATOR (FRONT DOOR)  under REMOVAL & INSTALLATION.
  2. Check the wiring harness and connector between the jam protection pulse switch and appropriate door ECU (driver or passenger). If the results are OK, check the appropriate door ECU (driver door ECU with master switch or passenger door ECU with power window switch). If the results are not good, repair or replace the wiring harness or connector.