LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1627 (Driver Information System) >> Combination Meter >> CONSULT-II Function (METER) >> Data Monitor >> Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Procedure

WARNING: This page is about a different car, the 2005 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
  2. Touch either "MAIN SIGNALS" or "SELECTION FROM MENU" on the "DATA MONITOR" screen.
    DATA MONITOR

    MAIN SIGNALS Monitors main signals.
    SELECTION FROM MENU Selects and monitors individual signal.
  3. Touch "START".
  4. When "SELECTION FROM MENU" is selected, touch individual items to be monitored. When "MAIN SIGNALS" is selected, main items will be monitored.
  5. Touch "RECORD" while monitoring, then the status of the monitored item can be recorded. To stop recording, touch "STOP".
    Fig 1: Display CONSULT-II Screen - Data Monitor
    G03597341Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals