Transfer Control Device

WARNING: This page is about a different car, the 2006 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

The transfer control device changes the state of transfer assembly between 2WD, AUTO, 4H->4LO with the 2WD, AUTO, 4H and 4LO signals of 4WD shift switch.

NOTE:

To shift between 4H->4LO, stop the vehicle, depress the brake pedal and shift the transmission selector to the "N" position. Depress and turn the 4WD shift switch. The shift switch will not shift to the desired mode if the transmission is not in "N" or the vehicle is moving. The 4LO indicator lamp will be lit when the 4LO is engaged.
Actuator motor and actuator position switch are integrated.