Transfer Control Unit Terminals And Reference Value
WARNING: This page is about a different car, the 2006 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
Data are reference value and are measured between each terminal and ground.
TRANSFER CONTROL UNIT TERMINALS AND REFERENCE VALUE
| Terminal | Wire color | Item | Condition | Data (Approx.) | |
|---|---|---|---|---|---|
| 43 | O | Wait detection switch |
|
4WD shift switch: 2WD, AUTO or 4H | Battery voltage |
| 4WD shift switch: 4H to 4LO (While actuator motor is operating.) | Battery voltage -> 0V | ||||
| 4WD shift switch: 4LO to 4H (While actuator motor is operating.) | 0V -> Battery voltage | ||||
| 4WD shift switch: 4LO | 0V | ||||
CAUTION:
When using a circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.