Section 1748 (Driver Information System (Coupe))
WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
- Precaution
- Combination Meters
- System Description
- Component Parts and Harness Connector Location
- Arrangement of Combination Meter
- Schematic
- Wiring Diagram - METER -
- Terminals and Reference Value for Combination Meter
- Self-Diagnosis Mode of Combination Meter
- Trouble Diagnosis
- Symptom Chart
- Power Supply and Ground Circuit Inspection
- Vehicle Speed Signal Inspection
- Engine Speed Signal Inspection
- Engine Coolant Temperature Signal Inspection
- Fuel Level Sensor Signal Inspection
- Fuel Gauge Pointer Fluctuates, Indicator Wrong Value or Varies
- Fuel Gauge Does Not Move to FULL position
- Electrical Components Inspection
- Removal and Installation for Combination Meter
- Disassembly and Assembly for Combination Meter
- Warning Lamps
- A/T Indicator
- Warning Chime
- System Description
- Component Parts and Harness Connector Location
- Schematic
- Wiring Diagram - CHIME -
- Terminals and Reference Value for BCM
- CONSULT-II Function (BCM)
- Trouble Diagnosis
- Symptom Chart
- Power Supply and Ground Circuit Inspection
- Combination Meter Buzzer Circuit Inspection
- Driver Side Door Switch Signal Inspection
- Key Switch Signal Inspection (Without Intelligent Key)
- Key Switch and Ignition Knob Switch Signal Inspection (With Intelligent Key, When Mechanical Key Is Used)
- Lighting Switch Signal Inspection
- Seat Belt Buckle Switch (Driver Side) Signal Inspection
- Component Inspection
- Can Communication
- Compass
- System Description
- Wiring Diagram - COMPASS -
- Fail-Safe System
- Power Supply and Ground Circuit Inspection
- Compass Does not Display
- Compass Display "- - -"
- Forward Direction Indication Slips Off The Mark or Incorrect
- Compass Reading Remains Unchanged
- Calibration Procedure for Compass
- Removal and Installation of Compass
- Clock