Torque Specifications
WARNING: This page is about a different car, the 2006 Scion tC. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Part tightened | N.m | kgf.cm | 48 in.lbf | |
|---|---|---|---|---|
| VANE PUMP ASSEMBLY | ||||
| Vane pump housing rear x Vane pump housing front | 22 | 224 | 16 | |
| Power steering oil pressure switch | 21 | 214 | 15 | |
| Pressure port union sub-assembly | 69 | 704 | 51 | |
| Power steering suction port union set bolt | 12 | 122 | 9 | |
| Vane pump assembly x Pump bracket rear | 37 | 377 | 27 | |
| Vane pump assembly set bolt | 34 (50) | 347 (510) | 25 (37) | |
| Pressure feed tube assembly x Vane pump assembly | 52 | 525 | 38 | |
| Pressure feed tube assembly clamp set bolt | 7.8 | 80 | 69 48 in.lbf | |
| POWER STEERING LINK ASSEMBLY | ||||
| Control valve housing set bolt | 18 | 185 | 13 | |
| Rack x Rack end sub-assembly | 73 (103) | 744 (1,050) | 54 (76) | |
| Tie rod assembly lock nut | 74 | 750 | 54 | |
| Cylinder end stopper x Rack housing | 122 | 1,244 | 90 | |
| Turn pressure tube union nut | 22 (25) | 224 (250) | 16 (18) | |
| Steering link assembly set bolt | 49 | 500 | 36 | |
| Pressure feed tube assembly union nut | 41 (44) | 414 (450) | 30 (33) | |
| Pressure feed tube clamp set bolt | 7.8 | 80 | 69 48 in.lbf | |
| Steering intermediate shaft x Steering link assembly | 35 | 357 | 26 | |
| Tie rod end sub-assembly lock nut | 74 | 755 | 55 | |
| Front suspension crossmember sub-assembly x Frame | 133 | 1,356 | 98 | |
| Crossmember bracket x Frame | Bolt A: | 133 | 1,356 | 98 |
| Bolt B: | 80 | 816 | 59 | |
| Crossmember x Engine mounting insulator rear | 65 | 663 | 48 | |
| Center member x Frame | 45 | 459 | 33 | |
| No. 1 hook x Center member | 39 | 398 | 29 | |
| Center member x Engine mounting insulator front | 72 | 734 | 53 | |
| Front suspension arm sub-assembly lower No. 1 x Lower ball joint | 89 | 908 | 66 | |
| Front stabilizer link assembly set nut | 74 | 755 | 55 | |
| Tie rod sub-assembly x Steering knuckle | 49 | 500 | 36 | |
| Steering intermediate shaft assembly No.2 x Steering intermediate shaft | 35 | 357 | 26 | |
| Front wheel set nut | 103 | 1,050 | 76 | |
| ( ): For use without SST | ||||