Special Repair Requirement
WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
- SAVING VEHICLE SPECIFICATION
Perform "READ CONFIGURATION" with CONSULT-III to save or print current vehicle specification.
GO TO 2
- REPLACE BCM
Replace BCM. Refer to "REMOVAL AND INSTALLATION ".
GO TO 3
- WRITING VEHICLE SPECIFICATION
Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual setting" with CONSULT-III to write vehicle specification. Refer to "CONFIGURATION : SPECIAL REPAIR REQUIREMENT ".
GO TO 4
- INITIALIZE BCM (NATS)
Perform BCM initialization. Refer to CONSULT-III Operation Manual.
Work End.