Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If possible, before removing BCM, retrieve current BCM configuration to use for reference when configuring brand-new BCM after installation. Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : SPECIAL REPAIR REQUIREMENT ".

Disconnect the battery negative terminal.
Remove the instrument lower panel LH. Refer to "EXPLODED VIEW ".
Remove the BCM screws and release the BCM.
Disconnect the BCM connectors and then remove the BCM.

Fig 1: Identifying Data Link Connector And BCM