LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 379 (Body Control Module) >> BCM (Body Control Module) >> Can Communication Inspection Using Consult-II (Self-Diagnosis) >> 1. Self-Diagnostic Result Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

1. Self-Diagnostic Result Check

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.
  1. Connect to CONSULT-II, and select "BCM" on "SELECT SYSTEM" screen.
  2. Select "BCM control unit" on "SELECT WORK ITEM" screen, and select "SELF-DIAG RESULTS".
  3. Check display content in self-diagnostic results.
Fig 1: Self-Diagnostic Results On CONSULT-II
G00331671Courtesy of NISSAN MOTOR CO., U.S.A.

Contents displayed 

No malfunction >> Inspection End

Malfunction in CAN communication system >> GO TO 2.

scientia non olet · About LEMON Manuals