2. Check App Sensor 2 Power Supply Circuit

WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect electric throttle control actuator harness connector.
Turn ignition switch ON.

Fig 1: Identifying Electric Throttle Control Actuator Harness Connector
Courtesy of NISSAN MOTOR CO., U.S.A.
Check voltage between electric throttle control actuator terminal 10 and ground with CONSULT-II or tester.

Fig 2: Checking Voltage Between Electric Throttle Control Actuator Terminal 10 & Ground
Courtesy of NISSAN MOTOR CO., U.S.A.

Voltage: Approximately 2.5V

OK or NG

OK: GO TO 3.
NG: Repair open circuit or short to ground or short to power in harness or connectors.