Customer Supplied Only One Or No Valid Keys
WARNING: This page does not describe the selected car, but rather 164 other vehicles, including the 2002 Volvo V70, 2002 Volvo V40, 2002 Volvo S80, 2002 Volvo S60, and 2002 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Cut new transponder equipped key(s). Using new key, turn ignition switch to ON position, then LOCK position 5 times. DO NOT leave key in either position for more than one second. Turn new key to ON position. SECURITY light should be flashing at 300-millisecond interval. Turn new key to LOCK position and wait about 5 minutes until SECURITY light flashing has decreased to 1.2-second interval.
- Input code word. See INPUTTING CODE WORD . SECURITY light should stop flashing and stay illuminated. Start engine with new key. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn new key to LOCK position and remove key.
- Using new second key, start engine. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn new second key to LOCK position and remove key.
- Repeat step 3 with new third key. Repeat step 3 with each new key, up to 8 keys total. Waiting 30 seconds will cause program to quit automatically.