With GST

Check voltage between ECM terminal 102 (PNP switch signal) and body ground under the following conditions.

VOLTAGE CHECKING CONDITIONS

Condition (Gear position)	Voltage V (Known good data)
P (A/T models only) or N position	Approx. 0
Except the above position	A/T models: Battery voltage M/T: Approximately 5V

If NG, go to "DIAGNOSTIC PROCEDURE ".

Fig 1: Checking Voltage Between ECM Terminal 102 (PNP Switch Signal) & Body Ground
Courtesy of NISSAN MOTOR CO., U.S.A.