Removal & Installation
WARNING: This page is about the Frontier Base, Automatic, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| In-Line4 | 3.3 | C | ||
| Combination Procedure: CLUTCH PILOT BEARING OR BUSHING: Remove & Replace: | ||||
| 0.5 | C | |||
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.5 | C | |||
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: | ||||
| 0.4 | B | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: TRANSMISSION COVER: Remove & Replace: | ||||
| Front | 0.4 | B | ||