ASCD Clutch Switch (For M/T Models)

1. Turn ignition switch OFF.
2. Disconnect ASCD clutch switch harness connector.
3. Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
   Fig 1: ASCD Clutch Switch Terminals Continuity Conditions Chart

   Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, adjust ASCD clutch switch installation, refer to CLUTCH PEDAL INSPECTION AND ADJUSTMENT and perform step 3 again.

Fig 2: Checking Harness Continuity Between ASCD Clutch Switch Terminals 1 And 2

Courtesy of NISSAN MOTOR CO., U.S.A.