Hazard and Horn Reminder

Power is supplied at all times:

• To remote keyless entry relay terminals 1, 3 and 6
• Through 15A fuse [No. 5, located in the fuse block (J/B)], and
• To horn relay terminals 1 and 5
• Through 10A fuse (No. 33, located in the fuse and fusible link box).

  When smart entrance control unit receives LOCK or UNLOCK signal from keyfob, ground is supplied:

• To remote keyless entry relay terminal 2
• Through smart entrance control unit terminal 7, and
• To horn relay terminal 2
• Through smart entrance control unit terminal 19.

Remote keyless entry relay and horn relay are now energized, and hazard warning lamp flashes and horn sounds as a reminder.

The hazard and horn reminder has C mode (horn chirp mode) and S mode (non-horn chirp mode).