With GST
NOTE:
Be sure to read the explanation of DRIVING PATTERN before driving vehicle.
- Start engine.
- Drive vehicle according to DRIVING PATTERN .
- Stop vehicle.
- Select MODE 1 with GST.
- If SRT of EVAP system is not set yet, GO TO the following step.
- If SRT of EVAP system is set, the result will be OK.
- Turn ignition switch OFF and wait at least 10 seconds.
- Start engine.
It is not necessary to cool engine down before driving.
- Drive vehicle again according to the DRIVING PATTERN .
- Stop vehicle.
- Select MODE 3 with GST.
- If P0455 is displayed on the screen, GO TO "DIAGNOSTIC PROCEDURE ".
- If P0442 is displayed on the screen, GO TO Diagnostic Procedure, for DTC P0442, DIAGNOSTIC PROCEDURE .
- If P0441 is displayed on the screen, GO TO Diagnostic Procedure for DTC P0441, DIAGNOSTIC PROCEDURE .
- If P0441, P0442 and P0455 are not displayed on the screen, GO TO the following step.
- Select MODE 1 with GST.
- If SRT of EVAP system is set, the result will be OK.
- If SRT of EVAP system is not set, GO TO step 6.