With Consult-II
- Turn ignition switch ON.
- Select "DATA MONITOR" mode with CONSULT-II.
- Wait at least 10 seconds.
- Press "CRUISE" switch for at least 10 seconds, then release it and wait at least 10 seconds.
- Press "ACCEL/RES" switch for at least 10 seconds, then release it and wait at least 10 seconds.
- Press "COAST/SET" switch for at least 10 seconds, then release it and wait at least 10 seconds.
- Press "CANCEL" switch for at least 10 seconds, then release it and wait at least 10 seconds.
- If trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".