LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1057 (Engine Control System) >> DTC P0011, P0021: IVT Control >> DTC Confirmation Procedure >> Testing Condition: >> With CONSULT-II
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  2. Start engine and warm it up to the normal operating temperature.
  3. Maintain the following conditions for at least 6 consecutive seconds.

    Hold the accelerator pedal as steady as possible.

    Fig 1: Displaying Data Monitor Screen
    G00775282Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: Conditions Chart
    G00775283Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Let engine idle for 10 seconds.
  5. If the 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE  . If the 1st trip DTC is not detected, go to next step.
  6. Maintain the following conditions for at least 20 consecutive seconds.
    Fig 3: Conditions Chart
    G00775284Courtesy of NISSAN MOTOR CO., U.S.A.
  7. If the 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE  .
scientia non olet · About LEMON Manuals