April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECM Inspection Table

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values and are measured between each terminal and ground. Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECMs transistor. Use a ground other than ECM terminals, such as the ground.

Fig 1: Identifying ECM Inspection Table (1 Of 10)

G00775213

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Identifying ECM Inspection Table (2 Of 10)

G00775214

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Identifying ECM Inspection Table (3 Of 10)

G00775215

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: Identifying ECM Inspection Table (4 Of 10)

G00775216

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 5: Identifying ECM Inspection Table (5 Of 10)

G00775217

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 6: Identifying ECM Inspection Table (6 Of 10)

G00775218

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 7: Identifying ECM Inspection Table (7 Of 10)

G00775219

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 8: Identifying ECM Inspection Table (8 Of 10)

G00775220

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 9: Identifying ECM Inspection Table (9 Of 10)

G00775221

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 10: Identifying ECM Inspection Table (10 Of 10)

G00775222

Courtesy of NISSAN MOTOR CO., U.S.A.