LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1082 (Automatic Drive Positioner) >> Automatic Drive Positioner >> Symptom Chart
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Symptom Chart

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM CHART

Symptom Diagnoses/service procedure
Only setting change function cannot be set with display.
  1. Preliminary check
PRELIMINARY CHECK 
  1. 2. CAN communication inspection using CONSULT-II (self-diagnosis)
ACTIVE TEST 
  1. 3. If the above systems are normal, check display system
Integrated display system
navigation system (with NAVI)
A part of seat system does not operate (both automatically and manually).
  1. Sliding motor circuit inspection
Component Parts And Harness Connector Location 
  1. 2. Reclining motor circuit inspection
CHECK FUNCTION 
  1. 3. Lifting motor (front) circuit inspection
Lifting Motor (Front) Circuit Inspection 
  1. 4. Lifting motor (rear) circuit inspection
Lifting Motor (Rear) Circuit Inspection 
  1. 5. If the above systems are normal, replace the driver seat control unit
COMPONENT PARTS AND HARNESS CONNECTOR LOCATION 
A part of pedal adjust and door mirror does not operate (both automatically and manually).
  1. Pedal adjusting motor circuit inspection
Pedal Adjusting Motor Circuit Inspection 
  1. 2. Mirror motor LH circuit check
Mirror Motor LH Circuit Check 
  1. 3. Mirror motor RH circuit check
Mirror Motor RH Circuit Check 
  1. 4. If the above systems are normal, replace the automatic drive positioner control unit.
COMPONENT PARTS AND HARNESS CONNECTOR LOCATION 
A part of seat system does not operate (only automatic operation).
  1. Sliding sensor circuit inspection
SLIDING SENSOR CIRCUIT INSPECTION 
  1. 2. Reclining sensor circuit inspection
RECLINING SENSOR CIRCUIT INSPECTION 
  1. 3. Lifting sensor (front) circuit inspection
LIFTING SENSOR (FRONT) CIRCUIT INSPECTION 
  1. 4. Lifting sensor (rear) circuit inspection
LIFTING SENSOR (REAR) CIRCUIT INSPECTION 
  1. 5. If the above systems are normal, replace the driver seat control unit
COMPONENT PARTS AND HARNESS CONNECTOR LOCATION 
A part of door mirror system does not operate (only automatic operation).
  1. Mirror sensor LH circuit check
Mirror Sensor LH Circuit Check 
  1. 2. Mirror sensor RH circuit check
Mirror Sensor RH Circuit Check 
  1. 3. If the above systems are normal, replace the automatic drive positioner control unit.
COMPONENT PARTS AND HARNESS CONNECTOR LOCATION 
All of the automatic operations do not operate.
  1. Park switch circuit inspection
A/T DEVICE (PARK SWITCH) CIRCUIT INSPECTION 
  1. 2. UART communication line circuit inspection
UART COMMUNICATION LINE CIRCUIT INSPECTION 
  1. 3. Pedal adjusting sensor circuit inspection
PEDAL ADJUSTING SENSOR CIRCUIT INSPECTION 
  1. 4. If all the above systems are normal, replace the automatic drive positioner control unit.
COMPONENT PARTS AND HARNESS CONNECTOR LOCATION 
A part of seat system does not operate (only manual operation).
  1. Sliding switch circuit inspection
SLIDING SWITCH CIRCUIT INSPECTION 
  1. 2. Reclining switch circuit inspection
Reclining Switch Inspection 
  1. 3. Lifting switch (front) circuit inspection
LIFTING SWITCH (FRONT) CIRCUIT INSPECTION 
  1. 4. Lifting switch (rear) circuit inspection
Lifting Switch (Rear) Circuit Inspection 
  1. 5. If the above systems are normal, replace the driver seat control unit
COMPONENT PARTS AND HARNESS CONNECTOR LOCATION 
A part of pedal adjust and door mirror does not operate (only manual operation).
  1. Pedal adjusting switch circuit inspection
PEDAL ADJUSTING SWITCH CIRCUIT INSPECTION 
  1. 2. Door mirror switch (change over switch) circuit inspection
DOOR MIRROR SWITCH (CHANGEOVER SWITCH) CIRCUIT CHECK 
  1. 3. Door mirror switch (mirror switch) switching circuit inspection
Door Mirror Switch (Mirror Switch) Circuit Check 
  1. 4. If the above systems are normal, replace the automatic drive positioner control unit
Component Parts And Harness Connector Location 
Only memory switch operation.
  1. Seat memory switch circuit inspection
Seat Memory Switch Circuit Inspection 
  1. 2. If the above systems are normal, replace the driver seat control unit
COMPONENT PARTS AND HARNESS CONNECTOR LOCATION 
Seat memory indicator lamps 1 and 2 do not illuminate.
  1. Seat memory indicator lamp circuit inspection
SEAT MEMORY INDICATOR LAMP CIRCUIT INSPECTION 
  1. 2. If all the above systems are normal, replace the driver seat control unit.
COMPONENT PARTS AND HARNESS CONNECTOR LOCATION 
The Entry/Exiting does not operate when door is opened and closed.
(The Entry/Exiting operates with key switch)
  1. Front door switch circuit inspection
FRONT DOOR SWITCH LH CIRCUIT INSPECTION 
  1. 2. If all the above systems are normal, replace the BCM.
REMOVAL AND INSTALLATION OF BCM
Only door mirror system does not operate (only manual operation).
  1. Door mirror switch ground circuit inspection
Door Mirror Switch Ground Circuit Inspection 
Only door mirror system does not operate (only automatic operation).
  1. Door mirror sensor power supply and ground circuit inspection
Only seat system does not operate (only manual operation).
  1. Power seat switch ground circuit inspection
Reverse tilt mirrors do not operate
  1. Mirror switch is not in L or R position.
  1. 2. CAN communication inspection using CONSULT-II (self-diagnosis)
ACTIVE TEST 
  1. 3. Door mirror sensor power supply and ground circuit inspection
DOOR MIRROR SENSOR POWER SUPPLY AND GROUND CIRCUIT INSPECTION