LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1105 (Integrated Display System) >> Integrated Display System >> Removal and Installation of Display Unit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation of Display Unit

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove combination meter. Refer to "REMOVAL AND INSTALLATION OF COMBINATION METER ".
  2. Remove combination meter rear cover.
  3. Disconnect combination meter ribbon cable.
  4. Remove the two display unit screws.
  5. Rotate bracket to remove it.
  6. Remove display unit.
  7. Installation is in reverse order of removal.
    Fig 1: Identifying Combination Meter Ribbon Cable
    G03501126Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals