With Consult-II
WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch ON.
- Select "DATA MONITOR" mode with CONSULT-II.
- Wait at least 10 seconds.
- Press "CRUISE" switch for at least 10 seconds, then release it and wait at least 10 seconds.
- Press "ACCEL/RES" switch for at least 10 seconds, then release it and wait at least 10 seconds.
- Press "COAST/SET" switch for at least 10 seconds, then release it and wait at least 10 seconds.
- Press "CANCEL" switch for at least 10 seconds, then release it and wait at least 10 seconds.
- If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".