CONSULT-II Functions: Notes
WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Do not use the "function test" for diagnosis. For more information, refer to "CONSULT-II OPERATION MANUAL (Function Test)".
- When the CONSULT-II is connected and communicating, ABS warning lamp, SLIP indicator lamp, and VDC OFF indicator lamp turn on, and when the communication is interrupted, the lamps will turn off.
- When self-diagnosis, data monitor, or active test functions are being executed, EBD, ABS, TCS, and VDC control is not conducted.
- When using CONSULT-II to conduct ABS actuator and electric unit (control unit) self-diagnosis, active test, work support, etc., first stop engine, connect the CONSULT-II, and select "ABS".
- When CONSULT-II is used, ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp may be turned ON/OFF.
- When an error is shown by the CONSULT-II SELF - DIAG RESULTS and CONSULT-II is used to conduct an active test, an engine system malfunction may be shown, but restarting engine will return the status to normal.