Section 1136 (Automatic HVAC)
WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- Precautions
- Preparation
- Refrigeration System
- Lubricant
- Air Conditioner Control
- Description of Air Conditioner LAN Control System
- System Construction
- Description of Control System
- Control Operation
- Notes
- Display Screen
- Auto Switch
- Temperature Dial (POTENTIO Temperature Control) (Driver Side)
- Temperature Dial (POTENTIO Temperature Control) (Passenger Side)
- RECIRCULATION (Rec) Switch
- Fresh (FRE) Switch
- Defroster (Def) Switch
- Rear Window Defogger Switch
- Off Switch
- A/C Switch
- Mode Switch
- Fan Control Dial
- Dual Switch (With Left And Right Ventilation Temperature Separately Control System)
- Fail-safe Function
- Discharge Air Flow
- System Description
- CAN Communication System Description
- Trouble Diagnosis
- Consult-II
- How to Perform Trouble Diagnosis for Quick and Accurate Repair
- Component Parts and Harness Connector Location
- Schematic
- Wiring Diagram - A/C -
- Auto Amp. Terminals and Reference Value
- Self-Diagnosis Function
- Operational Check
- Power Supply and Ground Circuit for Auto Amp.
- LAN System Circuit
- Mode Door Motor Circuit
- Air Mix Door Motor Circuit
- Air Mix Door Motor PBR Circuit
- Intake Door Motor Circuit
- Blower Motor Circuit
- Magnet Clutch Circuit
- Insufficient Cooling
- Insufficient Heating
- Noise
- Self-diagnosis
- Memory Function
- Ambient Sensor Circuit
- In-vehicle Sensor Circuit
- Sunload Sensor Circuit
- Intake Sensor Circuit
- Controller
- Auto Amp
- Ambient Sensor
- In-Vehicle Sensor
- SUNLOAD Sensor
- Intake Sensor
- Blower Unit
- Blower Motor
- Intake Door Motor
- In-Cabin MICROFILTER
- Heater & Cooling Unit Assembly
- Mode Door Motor
- Air Mix Door Motor
- Heater Core
- Ducts And Grilles
- Refrigerant Lines
- HFC-134a (R-134a) Service Procedure
- Components
- Removal and Installation of Compressor
- Removal and Installation of Compressor Clutch
- Removal and Installation of Low-pressure Flexible Hose
- Removal and Installation of High-pressure Flexible Hose
- Removal and Installation of Low-pressure Pipe 1 (Engine Compartment)
- Removal and Installation of High-pressure Pipe 1 (Engine Compartment)
- Removal and Installation of Low-pressure Pipe 2 and High-pressure Pipe 2
- Removal and Installation of Liquid Tank
- Removal and Installation of Condenser
- Removal and Installation of Refrigerant Pressure Sensor
- Removal and Installation of Evaporator
- Removal and Installation of Expansion Valve
- Checking for Refrigerant Leaks
- Checking System for Leaks Using the Fluorescent Leak Detector
- Dye Injection
- Electronic Refrigerant Leak Detector
- Service Data And Specifications (SDS)