Fuel System Test
WARNING: This page is about a different car, the 2002 Isuzu Trooper. However, it is still accessible from the selected car via links, so may be relevant.
Fuel system test checks fuel system for proper operation.
- Connect TECH 2 or equivalent scan tool to Data Link Connector (DLC). DLC is located at lower left side of instrument panel, behind a small cover. Turn ignition on, and go to next step.
- on scan tool, select F3: MISCELLANEOUS TESTS. From application menu, select F3: FUEL SYSTEM, and go to next step.
- Follow scan tool directions to test fuel trim enable/disable and open/closed loop status.
- If fuel system tests as specified, testing is complete. If fuel system fails test, test area of fuel system that failed test. See FUEL SYSTEM in SYSTEM & COMPONENT TESTING article.