Section 1416 (Driver Information System)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Infiniti FX45, 2005 Infiniti FX35, 2004 Infiniti FX45, 2004 Infiniti FX35, and 2003 Infiniti FX45. However, it is still accessible from the selected car via links, so may be relevant.
- Precaution
- Combination Meters
- System Description
- Component Parts and Harness Connector Location
- Arrangement of Combination Meter
- Circuit Diagram
- Wiring Diagram - METER -
- Terminals and Reference Value for Combination Meter
- Terminals and Reference Value for Unified Meter and A/C Amp.
- Self-Diagnosis Mode of Combination Meter
- CONSULT-II Function (METER A/C AMP)
- Trouble Diagnosis
- Symptom Chart 1
- Symptom Chart 2
- Power Supply and Ground Circuit Inspection
- Vehicle Speed Signal Inspection
- Engine Speed Signal Inspection
- Engine Coolant Temperature Signal Inspection
- Fuel Level Sensor Signal Inspection
- Odo/Trip Meter and Illumination Control Switch Inspection
- Fuel Gauge Pointer Fluctuates, Indicator Wrong Value or Varies
- Fuel Gauge Does Not Move to FULL Position
- Electrical Components Inspection
- Removal and Installation of Combination Meter
- Disassembly and Assembly of Combination Meter
- Removal and Installation of Odo/Trip Meter and Illumination Control Switch
- Unified Meter And A/C Amp
- Compass
- Warning Lamps
- A/T Indicator
- Warning Chime
- System Description
- CAN Communication System Description
- CAN Communication Unit
- Component Parts and Harness Connector Location
- Schematic
- Wiring Diagram - CHIME -
- Terminals and Reference Value for BCM
- Terminals and Reference Value for Unified Meter and A/C Amp.
- Terminals and Reference Value for Combination Meter
- Trouble Diagnosis
- CONSULT-II Function (BCM)
- All Warnings Are Not Operated
- Key Warning Chime and Light Warning Chime Does Not Operate (Seat Belt Warning Chime Does Operate)
- Key Warning Chime Does Not Operate (Without Intelligent Key)
- Key Warning Chime Does Not Operate (With Intelligent Key, When Mechanical Key Is Used)
- Key Warning Chime Does Not Operate (With Intelligent Key, When Intelligent Key Is Carried With The Driver)
- Light Warning Chime Does Not Operate
- Seat Belt Warning Chime Does Not Operate
- Lane Departure Warning System
- Precautions for Lane Departure Warning (LDW) system
- System Description
- CAN Communication
- Action Test
- Camera Aiming Adjustment
- Component Parts and Harness Connector Location
- Schematic
- Wiring Diagram - LDW -
- Terminals and Reference Value for LDW Camera Unit
- CONSULT-II Function (LDW)
- Trouble Diagnosis
- Preliminary Inspection
- Power Supply and Ground Circuit Inspection
- DTC [C1B00] Camera Unit MALF
- DTC [C1B01] Cam Aiming INCMP
- DTC [C1B02] VHCL SPD Data MALF
- DTC [C1B03] ABNRML Temp Detect
- DTC [U1000] Can Comm Circuit
- DTC [U1010] Control Unit (Can)
- LDW Chime Circuit Inspection
- LDW Switch Circuit Inspection
- LDW Indicator Lamp Circuit Inspection
- Turn Signal Input Inspection
- Removal and Installation for LDW Camera Unit
- Removal and Installation for LDW Chime
- Removal and Installation for LDW Switch
- Clock
- Rear View Monitor
- System Description
- Component Parts and Harness Connector Location
- Schematic
- Wiring Diagram - R/VIEW -
- Terminals and Reference Value for Rear View Camera Control Unit
- CONSULT-II Function (REARVIEW CAMERA)
- Side Distance Guideline Correction
- Power Supply and Ground Circuit Inspection
- Rear View Is Not Displayed With The A/T Selector Lever In R-Position
- The Rear View Image Is Distorted
- Removal and Installation of Rear View Camera Control Unit
- Removal and Installation of Rear View Camera