Section 1462 (Audio, Visual, Navigation & Telephone System)
WARNING: This page is about a different car, the 2005 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.
- Precautions
- Preparation
- Audio
- System Description
- Component Parts and Harness Connector Location
- Schematic
- Wiring Diagram - AUDIO -
- Terminals and Reference Value for Audio Unit for Base System
- Terminals and Reference Value for Audio Unit for BOSE System
- Terminals and Reference Value for BOSE Speaker Amp.
- Terminals and Reference Value for Woofer Amp.
- Trouble Diagnosis
- Noise Inspection
- Power Supply Circuit Inspection
- AUDIO PILOTTM Does Not Work
- Removal and Installation of Audio Unit (Base system)
- Locking CD Auto Changer Mechanism (Audio unit of BOSE system)
- Removal and Installation of Audio Unit (BOSE system)
- Removal and Installation of Door Speaker
- Removal and Installation of Rear Speaker
- Removal and Installation of Tweeter
- Removal and Installation of Woofer and Woofer Amp. (BOSE System)
- Removal and Installation of BOSE Speaker Amp.
- Removal and Installation of Microphone
- Audio Antenna
- Navigation System
- System Description
- Location Detection Principle
- Map-Matching
- GPS (Global Positioning System)
- Component Description
- Bird VIEWTM
- Map Display
- Function Of NAVI Switch
- "View" Mode
- "Heading" Mode
- "Nearby Display Icons" Mode
- "Save Current Location" Mode
- "Adjust Current Location" Mode
- "Auto Re-Route" Mode
- "Avoid Area Setting" Mode
- "Button Tone/Beep Response" Mode
- "Clear Memory" Mode
- "Edit Address Book" Mode
- "GPS Information" Mode
- "Quick Stop Customer Setting" Mode
- "Set Average Speed" Mode
- "Tracking" Mode
- Guide Volume Setting
- Precautions for NAVI Control Unit Replacement
- Component Parts and Harness Connector Location
- Schematic
- Wiring Diagram - NAVI -
- Wiring Diagram - COMM -
- Terminals and Reference Value for NAVI Control Unit
- Terminals and Reference Value for Display Unit
- Terminals and Reference Value for NAVI Switch
- Self-Diagnosis Function
- Self-Diagnosis Mode
- CONFIRMATION/ADJUSTMENT Mode
- Power Supply and Ground Circuit Check for NAVI Control Unit
- Power Supply and Ground Circuit Check for Display Unit
- Power Supply and Ground Circuit Check for NAVI Switch
- Power Supply and Ground Circuit Check for Power Cluster Lid Amp.
- Vehicle Speed Signal Check
- Illumination Signal Check
- Ignition Signal Check
- Reverse Signal Check
- When Display Cover is Closed, Display is Stay On
- Screen is Not Shown
- Navigation System is Not Operated by NAVI Switch
- Lid Does Not Move
- Color of Image is Not Proper
- Screen is Rolling
- Guide Sound is Not Heard
- The Position of The Current-Location Mark s Not Correct
- Radio Wave From The GPS Satellite is Not Received
- Driving Test
- Example of Symptoms Judged Not Malfunction
- Basic Operation
- Vehicle Mark
- Destination, Passing Points, And Menu Items Cannot Be Selected/Set
- Voice Guide
- Route Searching
- Examples Of Current-Location Mark Displacement
- Current-Location Mark Shows A Position That Is Completely Incorrect
- Current-Position Mark Jumps
- Current-Location Mark Is In A River Or The Sea
- Current-Location Mark Automatically Rotates
- When Driving On The Same Road, Sometimes The Current-Location Mark Is In The Correct Place And Sometimes It Is The Incorrect Place
- Location Correction By Map-Matching Is Slow
- Although GPS Receiving Display Is Green, The Vehicle Mark Does Not Return To The Correct Location
- Name Of Current-Location Is Not Displayed
- Contents Of The Display Differ For The Bird VIEWTM And The (Flat) Map Screen.
- Program Loading
- Removal and Installation of NAVI Control Unit
- Removal and Installation of GPS Antenna
- Removal and Installation of NAVI Switch
- Removal and Installation of Display Unit
- Removal and Installation of Power Cluster Lid Amp.
- System Description