April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECM Inspection Table

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values and are measured between each terminal and ground. Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECMs transistor. Use a ground other than ECM terminals, such as the ground.

Fig 1: Identifying ECM Inspection Table (1 Of 10)

G02446788

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: ECM Inspection Table (2 Of 10)

G02446789

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: ECM Inspection Table (3 Of 10)

G02446790

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: Identifying ECM Inspection Table (4 Of 10)

G02446791

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 5: ECM Inspection Table (5 Of 10)

G02446792

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 6: ECM Inspection Table (6 Of 10)

G02446793

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 7: ECM Inspection Table (7 Of 10)

G02446794

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 8: ECM Inspection Table (8 Of 10)

G02446795

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 9: ECM Inspection Table (9 Of 10)

G02446796

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 10: ECM Inspection Table (10 Of 10)

G02446797

Courtesy of NISSAN MOTOR CO., U.S.A.