Consult-II Reference Value In Data Monitor Mode

WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

Data are reference value.

DATA MONITOR MODE REFERENCE

Monitored item	Content	Condition		Display value
SHIFT ACT 1 [ON/OFF]	Output condition to actuator motor (clockwise)	Vehicle stopped Engine running For A/T models, A/T selector lever "N" position with brake pedal depressed. For M/T models, M/T shift lever neutral position with clutch and brake pedal depressed.	4WD shift switch: 2WD to 4H or 4H to 4LO or 2WD to 4LO	ON
SHIFT ACT 1 [ON/OFF]	Output condition to actuator motor (clockwise)		Except the above	OFF
SHIFT AC MON1 [ON/OFF]	Check signal for transfer control unit signal output	Vehicle stopped Engine running For A/T models, A/T selector lever "N" position with brake pedal depressed. For M/T models, M/T shift lever neutral position with clutch and brake pedal depressed.	4WD shift switch: 2WD to 4H or 4H to 4LO or 2WD to 4LO	ON
SHIFT AC MON1 [ON/OFF]	Check signal for transfer control unit signal output		Except the above	OFF
SHIFT ACT 2 [ON/OFF]	Output condition to actuator motor (counterclockwise)	Vehicle stopped Engine running For A/T models, A/T selector lever "N" position with brake pedal depressed. For M/T models, M/T shift lever neutral position with clutch and brake pedal depressed.	4WD shift switch: 4LO to 4H or 4H to 2WD or 4LO to 2WD	ON
SHIFT ACT 2 [ON/OFF]	Output condition to actuator motor (counterclockwise)		Except the above	OFF
SHIFT AC MON2 [ON/OFF]	Check signal for transfer control unit signal output	Vehicle stopped Engine running For A/T models, A/T selector lever "N" position with brake pedal depressed. For M/T models, M/T shift lever neutral position with clutch and brake pedal depressed.	4WD shift switch: 4LO to 4H or 4H to 2WD or 4LO to 2WD	ON
SHIFT AC MON2 [ON/OFF]	Check signal for transfer control unit signal output		Except the above	OFF