Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

Installation is the reverse order of removal.

Install new side oil seals into the front final drive assembly. Refer to "REMOVAL AND INSTALLATION ".
CAUTION:
- When installing the drive shaft assembly into the front final drive assembly, do not damage the side oil seal.
- Make sure there are no pinched or restricted areas on the breather hose caused by bending or winding when installing it.
- Fill the final drive with recommended gear oil after installation. Refer to "CHANGING DIFFERENTIAL GEAR OIL ".
Tighten the upper link ball joint stud nut to specifications. Refer to "COMPONENTS ".
Tighten the wheel nuts to specification. Refer to "ROTATION ".