Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Note the following, and install in the reverse order of removal.

When installing the transfer control unit, tighten bolts to the specified torque.
Transfer control unit bolts: 5.1 N.m (0.52 kg-m, 45 in-lb)
After the installation, check 4WD shift indicator pattern. If NG, adjust position between transfer assembly and transfer control unit. Refer to "PRECAUTIONS FOR TRANSFER ASSEMBLY AND TRANSFER CONTROL UNIT REPLACEMENT ".