Consult-II Reference Value In Data Monitor Mode

WARNING: This page is about a different car, the 2005 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Data are reference value.

ACTUATOR MOTOR MONITORED ITEM CONDITION CHART

Monitored item	Content	Condition		Display value
SHIFT ACT 1 [ON/OFF]	Output condition to actuator motor (clockwise)	Vehicle stopped Engine running A/T selector lever "N" position Brake pedal depressed	4WD shift switch: 4H to 4LO	ON
SHIFT ACT 1 [ON/OFF]	Output condition to actuator motor (clockwise)		Except the above	OFF
SHIFT AC MON1 [ON/OFF]	Check signal (reinput signal) for transfer control unit signal output	Vehicle stopped Engine running A/T selector lever "N" position Brake pedal depressed	4WD shift switch: 4H to 4LO	ON
SHIFT AC MON1 [ON/OFF]			Except the above	OFF
SHIFT ACT 2 [ON/OFF]	Output condition to actuator motor (counterclockwise)	Vehicle stopped Engine running A/T selector lever "N" position Brake pedal depressed	4WD shift switch: 4LO to 4H	ON
SHIFT ACT 2 [ON/OFF]	Output condition to actuator motor (counterclockwise)		Except the above	OFF
SHIFT AC MON2 [ON/OFF]	Check signal (reinput signal) for transfer control unit signal output	Vehicle stopped Engine running A/T selector lever "N" position Brake pedal depressed	4WD shift switch: 4LO to 4H	ON
SHIFT AC MON2 [ON/OFF]			Except the above	OFF