Diagnosis Procedure
WARNING: This page is about a different car, the 2005 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS PROCEDURE
| Symptom |
Possible cause |
Repair order |
| DTE (distance to empty) is not displayed properly. |
- Average fuel consumption display
- Fuel tank gauge signal circuit
|
- Make sure fuel consumption is displayed properly. If NG, check fuel consumption display.
- Make sure fuel gauge operates properly. If NG, check fuel gauge.
|
| Trip distance is not indicated properly. |
- ABS actuator and electric unit (control unit)
|
- Perform ABS actuator and electric unit (control unit) self diagnosis.
|
| Trip time is not indicated properly. |
- Fuse
|
- 10A fuse [No. 19 located in fuse block (J/B)]. Verify battery voltage is present at combination meter terminal 3.
|
| Average fuel consumption is not displayed properly. |
- Trip distance display
- Fuel consumption signal
|
- Perform ABS actuator and electric unit (control unit) self-diagnosis.
- Check CAN lines for open or short between ECM and combination meter.
|
| Average vehicle speed is not indicated properly. |
- Trip distance display
- Trip time display
|
- Perform ABS actuator and electric unit (control unit) self-diagnosis.
- Make sure trip time is displayed properly. If NG, check trip time display.
|