Consult-II Reference Value In Data Monitor Mode

WARNING: This page is about a different car, the 2005 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.

Data are reference value.

CONSULT-II REFERENCE VALUE IN DATA MONITOR MODE - ACTUATOR MOTOR

Monitored item	Content	Condition		Display value
SHIFT ACT 1 [ON/OFF]	Output condition to actuator motor (clockwise)	Vehicle stopped Engine running For A/T models, A/T selector lever "N" position with brake pedal depressed. For M/T models, M/T shift lever neutral position with clutch and brake pedal depressed.	4WD shift switch: 2WD to 4H or 4H to 4LO or 2WD to 4LO	ON
SHIFT ACT 1 [ON/OFF]	Output condition to actuator motor (clockwise)		Except the above	OFF
SHIFT AC MON1 [ON/OFF]	Check signal for transfer control unit signal output	Vehicle stopped Engine running For A/T models, A/T selector lever "N" position with brake pedal depressed. For M/T models, M/T shift lever neutral position with clutch and brake pedal depressed.	4WD shift switch: 2WD to 4H or 4H to 4LO or 2WD to 4LO	ON
SHIFT AC MON1 [ON/OFF]	Check signal for transfer control unit signal output		Except the above	OFF
SHIFT ACT 2 [ON/OFF]	Output condition to actuator motor (counterclockwise)	Vehicle stopped Engine running For A/T models, A/T selector lever "N" position with brake pedal depressed. For M/T models, M/T shift lever neutral position with clutch and brake pedal depressed.	4WD shift switch: 4LO to 4H or 4H to 2WD or 4LO to 2WD	ON
SHIFT ACT 2 [ON/OFF]	Output condition to actuator motor (counterclockwise)		Except the above	OFF
SHIFT AC MON2 [ON/OFF]	Check signal for transfer control unit signal output	Vehicle stopped Engine running For A/T models, A/T selector lever "N" position with brake pedal depressed. For M/T models, M/T shift lever neutral position with clutch and brake pedal depressed.	4WD shift switch: 4LO to 4H or 4H to 2WD or 4LO to 2WD	ON
SHIFT AC MON2 [ON/OFF]	Check signal for transfer control unit signal output		Except the above	OFF