LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1629 (Driver Information System) >> Warning Chime >> CONSULT-II Function >> Consult-II Basic Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Consult-II Basic Operation Procedure

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.
  1. With the ignition switch OFF, connect "CONSULT-II" and CONSULT-II CONVERTER" to the data link connector, and turn ignition switch ON.
    Fig 1: Locating Data Link Connector
    G00723652Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Touch "START (NISSAN BASED VHCL)".
    Fig 2: Consult II Display Screen
    G00723653Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Touch "BCM" on "SELECT SYSTEM" screen. If "BCM" is not indicated, go to CONSULT-II INSPECTION PROCEDURE .
    Fig 3: Consult II Display Screen
    G00723654Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Touch "BUZZER" in "BCM".
  5. Select "DATA MONITOR" or "SELF-DIAG RESULTS".
Fig 4: Consult II Display Screen
G00723655Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals