Power Supply And Ground
WARNING: This page is about a different car, the 2006 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
Power is supplied at all times
- through 20A fuse (No. 31, located in the fuse and fusible link box)
- to rear view camera control unit terminal 1.
When ignition switch is in ACC or ON position, power is supplied
- through 10A fuse [No. 4, located in the fuse block (J/B)]
- to rear view camera control unit terminal 2.
Ground is supplied
- to rear view camera control unit terminal 3
- through grounds B117 and B132
- to rear view camera terminal 2
- through grounds D403 and D404.