Removal and Installation of BCM: Installation

WARNING: This page is about a different car, the 2006 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

NOTE:

When replacing BCM, it must be configured. Refer to , "CONFIGURATION ".
When replacing BCM, perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to , "NVIS(NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS) ".
When replacing BCM, perform ID registration procedure of low tire pressure warning system. Refer to , "ID REGISTRATION PROCEDURE ".