Removal and Installation: Removal
WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the power steering fluid from the reservoir tank.
- Remove the engine room cover. Refer to "REMOVAL AND INSTALLATION ".
- Remove the air duct assembly. Refer to "REMOVAL AND INSTALLATION ".
- Remove the serpentine drive belt from the auto tensioner and power steering oil pump. Refer to "REMOVAL AND INSTALLATION ".
- Disconnect the pressure sensor electrical connector.
- Remove the high pressure and low pressure piping from the power steering oil pump. Refer to "HYDRAULIC LINE ".
- Remove the power steering oil pump bolts, then remove the power steering pump.