Pattern A

WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

Shift the transmission according to the directions below, and stay in "N" for at least 2 seconds.
- For A/T models, stop vehicle and move A/T selector lever to "N" position with brake pedal depressed.
- For M/T models, stop vehicle and move M/T shift lever to the neutral position with brake and clutch pedal depressed.
Turn 4WD shift switch to "4LO" position. Stay in "4LO" for at least 2 seconds.
Turn ignition switch "OFF".
Start engine.
Erase self-diagnosis. Refer to "HOW TO ERASE SELF-DIAGNOSTIC RESULTS " (with CONSULT-II) or "ERASE SELF-DIAGNOSIS " (without CONSULT-II).
Check 4WD shift indicator lamp and 4LO indicator lamp again. Refer to "CHECK 4WD SHIFT INDICATOR PATTERN ".

If 4WD shift indicator lamp and 4LO indicator lamp do not indicate proper pattern, install new transfer control unit and retry the above check.