CAN Communication Inspection Using CONSULT-II (Self-Diagnosis)

WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

SELF-DIAGNOSTIC RESULT CHECK

NOTE: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.

Connect CONSULT-II and CONSULT-II CONVERTER, and select "BCM" on "SELECT SYSTEM" screen.
Select "BCM" on "SELECT TEST ITEM" screen, and select "SELF-DIAG RESULTS".
Check display content in self-diagnostic results.

CONSULT-II DISPLAY CODE REFERENCE

CONSULT-II display code	Diagnosis item
U1000	INITIAL DIAG
	TRANSMIT DIAG
	ECM
	IPDME/R
	METER/M&A
	1-KEY

Contents displayed

No malfunction: Inspection End

Malfunction in CAN communication system: After printing the monitor items, go to "CAN System". Refer to CAN COMMUNICATION .