Inspection Procedure

WARNING: This page is about a different car, the 2006 Scion tC. However, it is still accessible from the selected car via links, so may be relevant.

POWER WINDOW REGULATOR MOTOR ASSEMBLY (LH AND RH)
1. Reset the power window regulator motor (see INITIALIZATION ).
2. Check if the power window AUTO UP/DOWN function operates normally.
  OK: AUTO UP/DOWN function operates normally.
NG : OTHER PROBLEM

OK: Go To Next Step
CHECK JAM PROTECTION FUNCTION OPERATING RANGE
1. Check that the jam protection function operates normally (see ON-VEHICLE INSPECTION ).
  HINT:
  
  The jam protection function does not operate from the fully closed position of the door glass to 4 mm (0.16 in.) below that.
NG : REPLACE POWER WINDOW REGULATOR SWITCH ASSEMBLY (LH AND RH)

OK : END