LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2010 (Transfer Case) >> ATX14B >> Trouble Diagnosis For System >> Line Pressure Switch >> Transfer Control Unit Terminals And Reference Value
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transfer Control Unit Terminals And Reference Value

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Data are reference value and are measured between each terminal and ground.

TRANSFER CONTROL UNIT TERMINALS AND REFERENCE VALUE

Terminal Wire color Item Condition Data (Approx.)
35 L Line pressure switch
  • Ignition switch: ON
  • A/T selector lever "D" position
4WD shift switch: AUTO 0V
  • Except the above
  • The vehicle has been left at room temperature for 5 minutes and more with ignition switch in "OFF" position.
  • Ignition switch: ON
  • A/T selector lever: "P" or "N" position
  • 4WD shift switch: Other than AUTO
Battery voltage
CAUTION: When using a circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.