Transfer Control Unit Terminals And Reference Value
WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
Data are reference value and are measured between each terminal and ground.
TRANSFER CONTROL UNIT TERMINALS AND REFERENCE VALUE
| Terminal | Wire color | Item | Condition | Data (Approx.) | |
|---|---|---|---|---|---|
| 28 | P | Sensor ground | Always | 0V | |
| 31 | G | Transfer fluid temperature sensor | Ignition switch: ON | Transfer fluid temperature approx. 20°C (68°F) | 1.1V |
| Transfer fluid temperature approx. 80°C (176°F) | 0.3V | ||||
CAUTION:
When using a circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.